Hi. Can some one explain to me how to wire my savage fog light switch please. Its the square one. The diagram I got with it I don't understand. It has four pins on the back and a spade terminal each side. Ive got the supply wire to the switch and the wire to the fog. On the diagram it says:

Position 1=Pins1,2,3made
Position 2=Pins3,5made.

Electrics arnt my strong point. Cheers Steve.

Guess

Position 1 = ON
3 Supply (Dipped Beam ON )
1 to Indicator Bulb on Dash which is to ground
2 Out to Fog and Fog is to Ground at Lamp

Position 2 = OFF



May want to consider a relay as well ?

Hi
This is how we have ours
works fine without relay & conforms to IVA




good luck.

Thanks for the replies. Now wired up and working.

Steve.

[Edited on 30/10/13 by stevem427]