wanting to know what size people have drilled the hole in there tanks for the fuel sender not wanting to take mine apart again, its for a friend.
Thanks

Surely depends upon the type of sender..........

My telemetrix sender stated 43-44mm dia., though I ended up wiggling it in through a slightly smaller hole, with no danger of anything shorting out.

Try using the sender unit gasket as a template, worked O.K for mine, hope this helps. Rusty

Fuel Level Gauge (Arm type sender)
Fuel sender (Arm type sender)
Fuel Level Gauge (Dip type sender)
Fuel sender (Dip type sender) from


Whats the differance ?

Cheapest one for R1 gauge/light

[Edited on 10-11-04 by mangogrooveworkshop]

this is what you are looking for it is the arm type sender

http://www.rjays.com/Gauges/autometer_images/3262_large.jpg