So, after many, many years, and lots of changes, my premier loom is getting a touch confused as to what goes where, and how it goes together.

The instructions are only so much use, so did any of you magnificent gentlemen ever doodle a diagram for the premier loom?

At this point it's either that, or rip the main bit out and start over

I'm in the process of doing mine while I wait for my bodywork, will be a while yet I would have thought though...

Yep - I've got one.

u2u me your email address & I'll send it to you.

Rgs

Done, Cheers

On its way!

Well, 39 months since my last visit to LocostBuilders, and a good ten years since I looked at my car!😬🤕

Somehow, my Sierra based Premier Wiring loom instructions/guide have gone walkies. I'd be really grateful if any of you might be able to help with a copy.

As an aside, having sat in the garage for at least 13 years, my standards have changed and I plan to strip it and "tidy" things up a little once I've moved it to it's new shed. I used POR 15 on the chassis, over painting it with some long forgotten oil based hand brushed paint. I've removed some of the paint and it's as good as new underneath.

Wish I could say the same about my brain!

I've done a schematic of the PWS loom that you're welcome to, if you want.

Just u2u me your email address if interested.

David