To the collective.....

I recently purchased my savage switches for the car but I'm struggling or rather havnt got a clue how to wire my savage switches up so the lights how they should for IVA and also the hazard/indicator wiring, well I'm at a complete loss.

Does anyone have any diagrams I could use to see how other peeps have wired them up.

Snowy has a general guide, seems quite in depth but not used it myself (still have my wiring to do!)
http://www.locostbuilders.co.uk/viewthread.php?tid=169470

The savage switch wiring diagram is also uploaded on here:

Cool thanks for that. I will have a good read through that over dinner. It's more the wiring up the switches for the lights so there ok for IVA

I have on here somewhers a cct diagram for wiring savage switches...i will see if i can find them.

The numbers refer to those on the savage switches themselves. ....

this is how to wire savage switches for the lighting cct...it uses 3 relays and is earth switched switches will illuminate when opperated.

[Edited on 14/5/15 by snowy2]

[Edited on 14/5/15 by snowy2]

Cool thanks for that. My uncle who is helping me out says he understands which is good, means he can do it for me haha.