Board logo

CBR 600 Carb TPS wiring help?
ProjectSi - 14/8/16 at 07:02 PM

Need a bit of help with my carbs. I'm trying to connect the carb TPS to the ECU I'm running however I have no idea what wire does what on the Carb side of the TPS. The carbs are CBR 600 carbs. I have three wires, A solid blue wire, a RED wire with tiny yellow strip and a Yellow wire with tiny red strip. Does anyone have any idea what does what?

tul214 - 14/8/16 at 07:32 PM

here

Just re read your colours and I think they should be;
Red/Yellow - Signal
Yellow/red - Positive
Blue - 0V

[Edited on 14/8/16 by tul214]

ProjectSi - 14/8/16 at 09:37 PM

quote:
Originally posted by tul214
here

Just re read your colours and I think they should be;
Red/Yellow - Signal
Yellow/red - Positive
Blue - 0V

[Edited on 14/8/16 by tul214]


Thanks, I had initially seen that post but my wires were totally different colour hence my post. Now that's sorted, I need to figure out what does what on the ECU side of the tps wiring lol. I wasn't sure what he meant by "Vref" when referring to the last wire hence the confusion

[Edited on 14/8/16 by ProjectSi]

[Edited on 14/8/16 by ProjectSi]

FASTdan - 15/8/16 at 07:44 AM

Bit late now, but for anyone searching in the future we have a TPS wiring guide on our website covering the common bike throttle position sensors:

danST Engineering TPS Wiring Guide