Sorry for all these questions

We're putting a Power Commander into the loom on the engine. The Power Commander instructions ask for the large connectors to be connected in series which I have done, it also asks for the small two wire connectors to be connected in series into a "white" connector under the seat (on the bike)... we have no white connector.

Image deleted by owner

My question is: what is this white connector under the seat for? I'm assuming; as it simply takes a red (positive) from the inter-connection; that it is merely a 12V ignition switched feed ie + feed for foot-peg.

Can anyone verify this for me as my questions to http://www.powercommander.com are being ignored.... which will go on the website as a negative!!! Maybe they will answer if I threaten them with this?

TIA


[Edited on 29-4-05 by Hellfire]

if it helps,

but i have those ones on my Honda loom for the 2 most important sensors on the bike.

- Cam shaft position
- Crankshaft position....

TKS

try giving holeshot in bradford a bell they must fit plenty of these

We've got a ZX12R bike in the workshop just now (minus engine! ) - but the rest of the loom is still on the bike. I'll have a look at it for you today and try to identify it.

The reply I got from Kawasaki is that it is a brake light connector, but he needs to verify this.

Steve - could you verify for me please. Kwak aren't too strong with replies lately.