I have just bought a heater from the stonleigh show. I plan to plumb the two hot air pipes under the scuttle, into the foot well, as I have no screen
and don't want to cut into my scuttle panel. For the same reason, I don't want toput a fan speed switch onto the dash.
Is it OK to connect the redundant windscreen wiper arm on my sierra column to the heater fan. off, intermittant, normal fast will becom off slow
medium fast.
Will SVA man obect?
Also, with the fan off, will the heater still leak hot air or do I have to put a hot water switch in line for hot summer days?
quote:
Originally posted by smart51
Is it OK to connect the redundant windscreen wiper arm on my sierra column to the heater fan. off, intermittant, normal fast will becom off slow medium fast.
Will SVA man obect?
Also, with the fan off, will the heater still leak hot air or do I have to put a hot water switch in line for hot summer days?
As i understand it, a switch must be clearly marked as to what it does. To be on the safe side I would remove/cover over the old markings and re mark
the stalk for fan control.
As for hot air, if the heater unit has a thermostat temperature control, then shut right down in summer, it should be plenty cool enough.
I don't have column stalks.
Just switches on the dash but none of them are marked and I passed fine
I've had another brain wave. The wiper arm also puls towards the wheel, originally for rear wipers. If I make this do the fog light, as well as up/down doing the heater, is there any reason why SVA man would object?
I've got fog lights on wiper one and fuel pump primer on washer button.
I think you just need to be careful to wire the fog lamps so they will ONLY come on with main lights.