Board logo

Ford Pinto Starter Motor / Packaging problem
Dane - 2/6/05 at 05:14 PM

Any tips on which (compact) starter motors that fit a 2.0 Pinto engine.

The problem I have is that the solenoid on the original starter motor is rather bulky and causes a packaging problem.


gregf27 - 2/6/05 at 07:37 PM

You need a lucas LRS 110 , cost £48.26 ( on an exchange) from LSuk - one in Shrewsbury, Shropshire. had my first one from a 2l capri in a scrappies, make sure that you can see the tag with LRS110 on though!!! , got one fitted to my F27, they are smaller and lighter too!!
hope this helps,
Regards,
Greg