I am building an MK Indy with an R1 engine. The R1 clocks I have read in kmh but obviously need to read in mph. The official R1 manual says US and UK clocks can be changed by holding the reset for 2 seconds. This does not work, so they must be euro clocks. A Speedohealer can apparently be programmed to make the digits read accurate mph but it won't change the readout letters from kmh to mph. Does anyone know where I can get this done? Does it need to read mph for the SVA?

This is exactly the problem I had with my 2000/01 Clocks. Apparently its only a quick solder on the circuit board to fix but as I didnt know I had to pay someone £60 to do it for me

I used Scorpio Electronics on 01553 670891. Not been able to get in contact with them over the last couple of days (think he might be on holiday). Got another set of clocks (2002/03) to do now

Unless anyone here has a set of 02/03 R1 clocks for sale?

Use a speedo healer and a new clock face from HERE

HTH

Why change the clock face the revs wont be euro equivalents

Thanks for the info. That's another little problem hopefully sorted.