Im using a premier wiring loom with sierra stalks. I went and bought a flasher relay from halfords as my local scrappy were charging almost as much for used ones. First of all i picked up the wrong one as it was on the wrong hook, i only realised when i took it out the packaging and realised it was only a 2 pin. I tried it anyway and the hazard works fine with all the lights flashing. But the stalks dont do anything.

When i went to get the correct sierra one with 3 pins, i put it in and the only thing that happens is the hazard light comes on when its clicked on.

When the 2 pin one is in the earth isnt connected which seems strange. Is there an easy way to test the stalks, to make sure they work?

Cheers

All sorted now, the relay was connected wrong and i was missing a fuse!

Now have a problem with main beam flash.... (see other post)

[Edited on 7/8/05 by greggors84]