Hi,

I know there has been some discussion on this particular subject before but I need help. I would really like to use the CBR1000RR Dash on my 1997 Fireblade RRV engine. Do any of you out there have the wiring diagrams for the CBR1000 so that I can see what I need to do. Or ideally someone who can tell me what to put where?! I will report back any findings especially if they have resulted in some fizzing and a BANG!

Thanks

You don't have a wiring diagram? We bought a manual with it contained - I'll see if it can be accurately copied. Failing that, there may be some pdf one's online if you're lucky!

Have a look here

http://www.biker.ie/forum/index.php?showtopic=214

It might be in there somewhere.

If not I'll have a look again later. I've got a couple of other links somewhere if nobody else has it.

http://www.rrzone.com/downloads/downloads.shtml

Their is the CBR900RR workshop manual if you ask on the forum someone might have the CBR1000RR

also some microfiches

I've done some similar research, but for a 929 cluster. If you look at the diagrams, you find that much of the information displayed on the guage cluster comes from the ECU. It's not just a matter of connecting wires from your 97 blade loom to connectors on the clocks.

I'm very interested in what you find out, though. It will be great if you can figure this out!

--Chris

Nope, can't find it.

Was that you asking about wiring diagrams on 'cbrworld' a few weeks ago.

Best bet is to maybe just find a friendly dealer and ask if they can print off a copy of the relevant page.

try vincegledhill hees putting cbr 1000f in his car he is also auto electrition nice bloke