I want some shift lights for the new build, preferably just a simple line of leds I can build into the dash and programme.
Any ideas? And before anybody suggest I should make them, you want to see my soldering.....
Try this, 4 in 1 gauge with shift light, oil pressure, oil temp and water temp.
Red line is at 12,000 rpm, so suitable for a bec.
On ebay at £45.
Linky
There is another bloke who sells them, in black with a carbon face, but they are in Oz.
Mike
I'm sure Demon Tweaks do some.
try this link
Interesting that the temps are in ºF, but the pressure is in kg/cm²
Try here >>> link
rallydesign sell Omex at the cheapest prices I`ve got the 4 led`s setup on race car and never look at the rev counter very easy to set up
Hi Jasper
If you use an aftermarket ecu, most have a shift light output, have you decided on an engine yet?
Adrian
I've got Datatool shift lights. 11 LEDs @ under £50
Linky
These are for bikes, but they simlpy run off the rev counter.
1 signal wire
1 earth
1 feed
[Edited on 13/9/05 by Lightning]
Thanks chaps I'll have a look at those......
And yes, I have an engine. It's still running in the car - I'm gonna see it run then help the guy remove it when I get back from the rally
this weekend. It's out of a mint 1999 200sx Nissan S14A, 52k full Nissan service history. The guy is giving me EVERYTHING i need including engine
& box/turbo/manifolds, intercooler, and wiring, pipes, ecu, ignition, keys, engine mounts, prop, fuel pump and really anything else I fancy on the
day for £1.1k, which isn't bad for an engine that's 200bhp as standard, but once I put an aftermarket airfilter, better exhaust (with cat
removed after SVA), cooler plugs and an manual boost controller it will be putting out nearer 250-260. I couldn't find any other engine that
gives anything like that kind of power and reliability for the money.
what was that you were saying about not spending money jasper?
be interested to see your progress with that lump, nice one
Ned.
Does anyone do a combined gear indicator and shift ligfhts?