Board logo

Zetec engine bay wiring harness
piddy - 10/10/05 at 04:56 PM

Hi.
Can anyone tell me if the Engine bay wiring harness is the same on the Phase 1 Zetec as the phase 2. I hope that makes sense.

What would be a sensble price (Second hand)

stevebubs - 10/10/05 at 05:00 PM

Silvertop (Phase 1/2 (93-mid 98)) and Blacktops (Phase 3 (mid 98-) ) have different Harnesses.

Blacktop variations are:
CAM Sensor (Edit: NOT TRUE; silvertops do have these)
Different Alternator Connections.

I'm guessing from the inclusion of the CAM sensor that the ECU is different, too.

HTH Stephen


[Edited on 10/10/05 by stevebubs]

BKLOCO - 10/10/05 at 05:14 PM

My silver top has a cam position sensor!!!!!

donut - 10/10/05 at 05:19 PM

Yeah, it looks like this:

bob - 10/10/05 at 06:02 PM

Andy

I think that is a pic of a crank position sensor, Donut

Danozeman - 10/10/05 at 07:21 PM

My silver top has a CPS. They are different harness's though and the ecu's are different.

stevebubs - 10/10/05 at 07:41 PM

quote:
Originally posted by BKLOCO
My silver top has a cam position sensor!!!!!


Apologies - just had a nosy around - you're quite right.

Stephen

saigonij - 11/10/05 at 12:01 PM

the wiring is even differnt between silver top escorts and silver top mondeos.

We used a engine bay loom from an escort 130bhp zetec, but the inlet manifold from a mondeo ( to get around the height ). I had to remove the injector and tps loom on the inlet manifold that we took from the mondeo and replace it with the one from the escort metal inlet manifold as the pin outs into the main loom were different.

if that makes any sense at all!!!