Not the best when it comes to electrics, but... before I started messing tonight my digidash worked when you turned the ignition key. Now it doesn't it still works when I mess about with the wiring I did do... but not sure what I have done to mess things up. After taking apart all the wiring I had done and removed it... Digidash still not working? Any ideas, as I am feeling rather lost for ideas

Many thanks

Digidash is mk1 if this helps any

[Edited on 6/12/05 by RobC]

not fimiliar wi digi dash but im sure youll have two feeds 1 permanent 1 ign fed check these for power 1st if still no go check and maybe redo earth to different place, straight to battery 1st to see if thats the prob.

will try again tomorrow. kind of had enough with it tonight you kind of know things are going down hill when your talking to yourself in the garage

Cheers

Rob

Rob,

You may have blown the inline fuse in the Digidash live feed wire so check this first.

I have a wiring diagram here http://www.dewweb.co.uk/indyblade/images/Indyblade_wiring_v17.pdf that shows how I connected my DD1, not sure what engine you have but at least it may help.

Rich.

The thing Ive learnt when trying to resolve electrical gremlins is ALWAYS CHECK THE EARTH FIRST

Don't panic Mr Mainwaring!!!!!!!!

All sorted just a blown fuse thankfully. Although I have learnt my lesson and will be calling in the help of people who know what they are doing

Just need to get the hazard and indicators done, and I would be guessing how to wire those suckers up, so best to be save.

Cheers for the help last night

Rob