can any one help ??
im changing back to the 3 pin flasher relay.

ive disconnected the relay i had on there, it was for led type lights (flashers)

im now left with 3 wires
white/black tracer
brown/yellow tracer
brown

its a premier wiring loom i need to know which wire goes on which terminal

terminals on the 3 pin relay are 49,49a,31

thanks
simon

49 is the supply voltage from battery
49A is the power to ind switch
31 is your earth
not sure about which wire goes where though.

Simon, I've got the premier wiring Notes, but there isn't any pin numbers on them to show what goes where, and I don't have my car here at the house, your welcome to borrow the notes though if it helps ???

Jason

Its probably safe to say that the brown is an earth (check it with a continuity tester first though) The other two will be power & load which you can also test with a circuit tester.

Hope that helps

cheers guys
ive spoken to alan at premier hopefully got it sorted .

it doesnt say in the notes as orginally it was prewired and i got the block off to fit this led type relay.

thanks si