I hope someone can help me with this thing. I'm trying to connect the wires coming from the backside of the thing where you put the starting key that came from a Ford Sierra with the fireblade loom, but i can't find out what colour has to go where ?
There are a yellow (contact1), black/yellow (contact2), black/blue (start) and red cable.
The red one was the easy one but what are the colours of the cables coming from the fireblade loom that i have to connect.
I tried to find out with the Haynes manual but couldn't sort it out.
Please Help ..........
I'm using a SC33E fireblade from 1999.

Thanks,

Marco

mhh not very complicated do you have a wireing diagram of that bike?

i can help you.

also make a sheme what the starter does.
for example if you power the red one where does that power go to at wich position..

Tks

I used this on my 893cc engine should give a good idea if not the same


http://www.dodgyroger.com/locost/Tech_Tips_Wiring_the_Fireblade_engine.pdf

[Edited on 31/5/06 by Kev99]