Hello all
me again, as everyone was so helpful last time i have another question. im still pricing up kits and trying to decide who to go with and where to get parts from .....

ATM im looking for all the stuff on the dash, so things like speero, Rev counter and temp guages...

I cant finda price on the MK site and westfield and tiger prices seem quite similar.

But are there alternatives that are cheaper, as its going to be a *locost* build? all the third party places ive found seem to want about 150 for a speedo alone.

Thanx in advance

John

Try ACEWELL

Remember that to pass the SVA you only need a working Speedo with odometer function, plus the warning lights (brake fluid level and hazard / indicator tells and fog lamp).

Knowing how hard it is to pass the SVA at Newcastle I had a Bright6 Unit and the VR2 Veypor unit and no other dials for the test.

As far as I know people have passed using cycle computers, which can be had for around the £30 mark.

Rev counter, engine temp, oil temp, oil pressure, fuel gauge, volt meter etc can all come later, think of them as luxuries!

HTH

Mike

If you want locost use the Sierra dials - If you buy a dodnor car you get a free speedo, rev counter, fuel guage, temp guage and all the warning light you need.

It's easy enough to cut it down and make it fit a homemade dash.

Stu

Go for a bike engine. You usually get all the necessary dials and gauges you'll need...........

Phil

Morning all
As always loads of great replies
I thinkacewell have it 140+vat for speedo and revs as well as warngin lights all wraped up in something that looks VERY cool

Cheers

John

or here
button

yep

3150 or 2853 if i can afford when i Buy, looks much nicer n i can include the warning lights on it

Thanx once again everyone. one thing that stands out about the kit car scene is how helpful everyone is

So far ive got my budget do to about 6k for a westfield built ready for theroad. although for this im gonna have to lean how to wire my own loom and many other things


John

[Edited on 16/9/06 by JackNco]

wait a minute..... does anyone knwo if there would be a problem using these dials, the 2853 specificaly with a Zetec engine?

John