Hi All, does anybody happen to have a copy of the EEC IV wiring diagram, and the pin tables, for a 1989 Ford 2.9i V6. I have finaly located a way of fitting a MS system, but need to get hold of the above info, to be able to do it. I have two (differing) copies of the Haynes manual for the car, but niether shows it. Thanks in advance. Regards Ray.

[Edited on 8-10-06 by Chippy]

Blue Haynes for sierra shows EEC 1V wiring diags 13-64 and 13-65 for CVH and DOHC. Both show the pin out numbers of the EEC 1V and where they go if you have a lot of patience and a good magnifying glass. I would expect the pin functions are common. Sorry but no clues to the 2.9i engine.

Hi i have a pin data book what is the engine code ie BRC BRD/E/F so as to get the correct pin data

Hi, its the BRC engine, pre cat, but set up for unleaded. Any chance you could email me the pin no's. Thanks Ray.