Morning all,

Mornign all I'm putting the finishing touches to My Megajolt setup today, small hitch is, I'm not sure which colour is which on the TPS sensor I have.

It's a webber TPS, small and red with a bent over lever to move the POT. The three wires are Red, Yellow and Green.

So my questions is which one is +5v, gronud and signal?

Many thanks in advance

[Edited on 12/11/06 by nib1980]

For my Dunnell ecu -

pin 1) yellow Tps wiper(signal out)

pin2) black Tps 0v

pin3) red Tps +5v input


regards warren