Had a bit of trouble getting the correct parts together after ordering my board, box and chip from the states.

Have got a part list together to use at Farnell online, everything we should need except the female crimped connectors which you can source by getting L70AZ from Maplins which will give you the connectors you need as well as a block you won't need, but it's still cheaper doing it this way as Farnell only sell the connectors in 500's for about £13!

I haven't built mine yet but if anybody spots an error can they let me know and I'll correct it, obviously it's down to you to check yourself that these are the correct parts and I won't be held accountable for any damage that using these bits may cause. But saying that I reckon I'll find out before you if things go wrong

Cheers

Rich

Apparently this fella martin@millener.com can get all of the stuff but a bit cheaper, too late for me but somebody can give him a try.

[Edited on 5/1/07 by RichardK]

All those parts look good to me , but you have added an 18v zener that is not required?
Paul.

quote:

---

Originally posted by RichardK
Had a bit of trouble getting the correct parts together after ordering my board, box and chip from the states.

Have got a part list together to use at Farnell online, everything we should need except the female crimped connectors which you can source by getting L70AZ from Maplins which will give you the connectors you need as well as a block you won't need, but it's still cheaper doing it this way as Farnell only sell the connectors in 500's for about £13!

I haven't built mine yet but if anybody spots an error can they let me know and I'll correct it, obviously it's down to you to check yourself that these are the correct parts and I won't be held accountable for any damage that using these bits may cause. But saying that I reckon I'll find out before you if things go wrong

Cheers

Rich

[Edited on 5/1/07 by RichardK]

---

Good point, TPS

But if somebody fancies doing a MAP version that would be excellent

Rich

quote:

---

Originally posted by paulf
All those parts look good to me , but you have added an 18v zener that is not required?
Paul.

---