Been studying the Vicky Green wiring loom diagram, got a bit of a head ache now.
Should there be a relay for the intermittant window wipers. The diagram shows the cables that go to the wiper motor and at the stalk end but no relay,
i'm sure the wiper motor doesn't do it. How is this done?
Intermittant window wipers are a bit posh for a 7. All you need is self parking wipers and the motor will do that for you.
Geoff
It might be like my Bedford Rascal where the intermittent is built into the stalk controller. I found this out when I replaced the stalk and only an
updated version was available (as plug-in replacement) Suddely - surprise - I had intermittents
HTH
If your having wipers and want intermitant you will need a relay. It's the red one in a sierra btw.
john.
Bin the wipers, take the windscreen off, fit an aeroscreen, save some weight, problem solved.
David
Or you can DIY it Locost stylee and do wot I did and build an intermitent relay out of a 555, some diodes (to get the pulse duty right) and a £1 maplin relay... Very posh- I can set the wiper pause time from anything between about 5 seconds and 60 seconds.... Not that I ever bother mind, it's stayed on whatever it was when I built it!!! 10 seconds IIRC....
quote:
Originally posted by BenB
Or you can DIY it Locost stylee and do wot I did and build an intermitent relay out of a 555, some diodes (to get the pulse duty right) and a £1 maplin relay... Very posh- I can set the wiper pause time from anything between about 5 seconds and 60 seconds.... Not that I ever bother mind, it's stayed on whatever it was when I built it!!! 10 seconds IIRC....
quote:
Originally posted by DavidM
Bin the wipers, take the windscreen off, fit an aeroscreen, save some weight, problem solved.
David