ive tried and failed 2 nights running as im unsure which wires to use to feed my stalks
i somehow managed to get power to hazards/ indicators but not to lights and then power to lights but not indicators

im using 2004 zx12 loom and 1990 sierra stalks (round hazard button)

any help would be really appreciated

Hi

I only used the indicators from the sierra to my zx9r loom..for the lights Iwill use regular switches or buttons..all very confusing.

i am thinking of using toggle switches for lights and indicators ill see how today goes

Trying to merge the Haynes Sierra electrical diagrams and the Haynes zx12 diagram doesn't sound like fun.... but it should be do-able.

Presumably you've got the pin-outs for the Sierra stalks etc....

ive got full loom diagram for zx12 (thanks to hellfire)
and pin outs for sierra (thanks graememk)
sierra pin outs have switched feed to each side of stalks and one from battery
where as it seem zx has individual feed to each switch
i think ill connect ill feeds to stalks together and see if i have power at each outgoing wire

before then trying to figure out which of the bike switch feeds to use

in case you hadnt guessed i dont usually do electrics lol

[Edited on 9/8/07 by eccsmk]