Board logo

Veypor2 magnets
Paul (Notts) - 14/8/07 at 02:33 PM

The fitting kit comes with two magnets of different sizes. The instructions seem ( but are unclear ) to indicate that only one of them is fitted.

Anyone confirm that I only need to fit one magnet.

Paul.

Guinness - 14/8/07 at 02:37 PM

Yup

I fitted one magnet inside my drivers side front wheel. I have a spare magnet stuck to the side of the tool cabinet.

Cheers

Mike

TimC - 14/8/07 at 02:43 PM

Aye - just the one. In my case countersunk into one of the diff-prop bolts.

Paul (Notts) - 14/8/07 at 03:44 PM

Cheers...

will fit it to a bolt on the diff..( not sure yet )


Paul.

skydivepaul - 14/8/07 at 04:28 PM

quote:
Originally posted by Paul (Notts)
Cheers...

will fit it to a bolt on the diff..( not sure yet )


Paul.


i fitted mine to the OSF wheel to give a more accurate read out. you dont get any false readings due to wheelspin for the 0-60 and 1/4 mile times then.

cheers

Paul

GeoffB - 14/8/07 at 09:35 PM

i fitted mine to front wheel,as it was easy to work out and dosent get effected by wheelspin,esp on track logging