Board logo

viento wiring diagram
kenton - 24/9/07 at 08:26 PM

Hi all,
Im about to sort out all the wires behind the dash and i dont have a wiring diagram. Its a luego loom with relay pack. Is there a diagram available?
Thanks kenton


NeilP - 24/9/07 at 09:24 PM

Kenton, There was never a diagram as such just some (dubious) written instructions - I'll see if I can dig out and scan in - In the meantime you should have everything on the loom labelled as supplied so you should be able to lay out over the chassis and do trial fit etc?...


kenton - 24/9/07 at 09:32 PM

Thanks,
yes it was labled, the rest of the loom is done its only the connections behind the dash.
I was hoping not to have to go through them with a meter!
kenton