Hi,

I can't get out of this problem.
Have used a diagram from hellfire and a nice drawing from an other user on this forum but still don't know how to wire it.
There is a grey wire coming from the turn signal relay.
But how do i have to wire it to the Sierra indicators.
I tried to connect it to the black/red and black/white and but where do i have to wire the black wire ?
It says switched + VE supply but i don't know what that means.
Hope someone can help me with this.


Thanks, MarcoImage deleted by owner

Which flasher relay are you using? A switched + wire is one that is only live when the ignition is on in the engine running position and is black in a Ford loom. Permanent live is on all the time and is red in the Ford loom.

I'm using the original flasher relay coming from the 1999 fireblade loom.
There are going 1 green/white, 1 green and one grey wire coming out of the relay.