Hi all

Can anyone describe (or point me at somewhere that does) how best to cut down the Pinto distributor when fitting the Megajolt.

Thanks
Paul

Some info here
http://www.locostbuilders.co.uk/viewthread.php?tid=54084

cut mine higher than that, at the bottom of the dizzy part
, gives a flat flange to mount a bracket to put the coilpack on

Thanks all. Well i have ended up cutting it off just like the following link for now. Might look at going for the really short version later on myself unless i end up mounting the coil pack as per the link

http://www.ford-capri.fsnet.co.uk/whiterose/megajolt.htm