I have situated my coils one either side of the engine on the cradle on my MK Fireblade, Question is, the leads are not quite long enough, I was going to replace them anyway, therefore where can I get cheap HT leads preferable in blue?, or are they available where you can buy the materials and make them yourself?
Regards
Barry

[Edited on 21/5/08 by LBMEFM]

Hi barry, the blade plug ends unscrew from the cable and the coil packs unscrew. I bought my ht cable from a local motor factors as its a standard 7mm cable. You should be able to find a blue colour or if you get frantic buy a set and cut them to size.

Regards Roger

Thanks Roger. I am nearly at the stage for the first engine start up. However, I would like some advice on wiring details, would you be up for that.
Regards
Barry