Board logo

Perei rear lights
Mark G - 13/6/08 at 08:52 PM

Hi all,

I have a set of perei rear lights. I have the indicators and side/brake lights. They are 2 pin and 3 pin connectors. I don't have any wiring connectors to fit the plugs on the lights.

Has anyone found or know of anywhere I may be able to buy the connectors for these lights.

Lights are the same as below.


Thanks in advance.
Mark.

[Edited on 13/6/08 by Mark G]

jos - 13/6/08 at 08:57 PM

MAC#1

Pdlewis - 13/6/08 at 08:57 PM

sorry cant help with the plug but where did you get the lights?

Mark G - 13/6/08 at 09:08 PM

quote:
Originally posted by Pdlewis
sorry cant help with the plug but where did you get the lights?


I bought them used from a chap on here. I imagine that Mac1 sell them.

clairetoo - 13/6/08 at 09:12 PM

I got some off fleabay not long ago .

irvined - 13/6/08 at 10:55 PM

Having just had a look for the same thing - they are mini timer connectors but with an extra detent - apparently you can get a standard mini timer connector and file off the detend from the lights and it will fit, or you can pay a bit more for the correct one.

Premier wiring can supply them (But are currently out of stock.)

mistergrumpy - 14/6/08 at 11:23 AM

Are you after the plastic 90 degree wiring plug/bulb holder. If so then car builder solutions have them here. They are listed under the light at 2.99 each plus the p&p. If its the actual little steel tabs that crimp onto the wire and insert into the plug then I've seen them at Maplins.

Steve @ sVc - 17/6/08 at 12:16 PM

90 bulb-holder conncectors.

You can get them from us @ sVc - we supply them included with the lights we supply.

Regards
Steve @ sVc