Does anyone know what the "TECH" wire between the ECU and Clocks on a 'Busa loom is for. I'm suspicious that it may be the wire for the red "FI" light on the clocks but does anyone know for sure?
Tech Wire
Clive
Hi All,
Does anyone know what the "TECH" wire between the ECU and Clocks on a 'Busa loom is for. I'm suspicious that it may be the wire
for the red "FI" light on the clocks but does anyone know for sure?
Tech Wire
Clive
Is that not for the fault display from ECU to digital display on the clocks?
quote:
Originally posted by Paul TigerB6
Is that not for the fault display from ECU to digital display on the clocks?
Have a read through this - it may help.
Linky
Many bikes have the ability to read a fault code from the dash and is a big advantage to using the bike clocks in my opinion - especially with an
injected bike. As you suggest it looks like that wire might connect to the FI light but the above link may help you access the fault codes also on
your dash.
Hope this helps. (i dont have a Busa myself anyway!!)
FI does stand for Fuel Injection, but this light also covers many other diagnostics depending on what code is displayed in the LCD
quote:
Originally posted by iiyama
FI does stand for Fuel Injection, but this light also covers many other diagnostics depending on what code is displayed in the LCD