i bought a wiring loom from ebay for a xflow locost. unfortunately it never had a wiring diagram with it. is there any one out there that could see it in their hearts to forward me a copy either on email or post please. Im not sure where the loom came from originally but it has a 8 point fuse box and all the individual groups of wires are labelled( engine bay, rear lights, front lights etc) Any help would be greatly appreciated.

the loom isnt from an escort

it is a loom similar to a vicki greens or premier wiring solution. i have emailed these companies to see if they could help, but no response as yet. any help please


[Edited on 3/1/04 by Kitlooney1000]

assuming the loom came from an escort, would the diagram from the back of a mk1 escort haynes manual help any?

let me know if you want it

regards
mark

now my post looks stupid

kitlooney1000, Give Gary L a phone he has two looms at the mo, he maybe able to spare the instructions for a while.

All the best Dan.

will do that dan.

lew

Sorry dan, gary l's loom isnt the same one. have tried to match up but no luck. Anyone got any ideas what i can do without buying another loom. im pretty good with electrics but this has got me stumped.

'Most' looms follow a standard(ish) colour code. Is it possible to work out the wiring to the headlamps? If they are black/blue-white/blue-red, then it is the old british standard, an old Haynes manual on a Mini etc will give you a head start. If they are white/yellow/brown, it looks like it could be wired to the Euro standard, and a later Ford book should help. If it is anything else, you could be in the sh#t....

i will try some of the old hayes manuals. one way or another it will go in this car.