Board logo

Duratec Parts
belgian2b - 24/6/20 at 08:34 AM

Hello,

just started my Pinto to Duratec conversion.

So , i am looking for :

Low sump ( i contacted Flak Monkey about his flatpack, but no answer at the moment)
Duratec to Type 9 belhousing

any other part that you think may be usefull for the covnersion


let me know


Gerardo


snapper - 24/6/20 at 03:42 PM

Tiger Racing do a cast lowline sump for £290, cheaper than Raceline not as well baffled
Jamsport do a high pressure oil pump (2.3 pump) and new pickup for £129 but buy a new oil seal for the pickup for £4.80.

[Edited on 24/6/20 by snapper]


belgian2b - 4/7/20 at 03:26 PM

Hello,


so before i buy new parts, i make a last call .


I am looking for :

Duratec to Type 9 bellhousing ( cable)
RS2000 clutch fork
RS2000 clutch release bearing

duratec 8.5 inch flywheel

1 liter swirl pot
high pressure fuel pump
adaptable fuel pressure regulator


let me know what you have


Gerardo


femster87 - 4/7/20 at 10:46 PM

I might have all of these, but i cannot check until Monday

1 liter swirl pot
high pressure fuel pump
adaptable fuel pressure regulator


belgian2b - 5/7/20 at 10:28 AM

You have U2U

quote:
Originally posted by femster87
I might have all of these, but i cannot check until Monday

1 liter swirl pot
high pressure fuel pump
adaptable fuel pressure regulator