leemarkadams
|
| posted on 26/6/09 at 08:57 PM |
|
|
99 R1 RPM sensor and speedo sensor feeds
Hello all,
Have tried wiring in mt gear indicator for my R1 engined MK Indy but not sure I have tapped into the right wires for the spped and the RPM, so where
do these originate from so I can tap into them there?
Thanks
Lee
|
|
|
|
|
james h
|
| posted on 26/6/09 at 09:23 PM |
|
|
Speed is taken from the gearbox - there are 3 wires coming from the sensor.
If you have a speedohealer then you should be able to find it by tracing the wires back to the engine. I am not in the garage now, but if I remember
correctly it is mid way between the prop adaptor and the clutch cover, and towards the bottom of the gearbox.
Can't remember where the revs are taken from.
James
|
|
|
leemarkadams
|
| posted on 28/6/09 at 08:30 PM |
|
|
Anyone else able to help, as can't seem to get the gear indicator to work....
Lee
|
|
|
mad-butcher
|
| posted on 29/6/09 at 07:45 AM |
|
|
rev counter = yellow/black goes from ignitor unit to rev counter (std clocks)
as already said speedo is the triangular plug between gearbox output and clutch cover
(1)white, (2)blue/yellow, (3)black/blue into loom
(1)pink, (2)orange/red, (3)black/white out of gearbox
tony
|
|
|
