FrankP
|
| posted on 24/12/09 at 12:00 PM |
|
|
Acewell 3853 Wiring Query
Hi,
I am trying to wire a Acewell 3853 and am stuck on the wires that go to the speed sensor.
Acording to the wiring diagram that I have the speed sensor wiring has a green and white wire that connect to to the red and white wire on the on the
speed sensor - however on the unt I cannot see an white wire - am I missing something - hoiw do I connect the speed sensor?
Thanks
Frank
|
|
|
|
|
Alan M
|
| posted on 24/12/09 at 12:52 PM |
|
|
Isn't it one of the 2 pin plugs? Acewell electrics are faily robust so I don't think you'll blow the unit if you connect it up
wrong. I can have a look for you when I get home from work later.
|
|
|
russbost
|
| posted on 24/12/09 at 01:54 PM |
|
|
Should be a 2 pin plug connector, male/female halves - you shouldn't need to be connecting separate wires???
[Edited on 24/12/09 by russbost]
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
FrankP
|
| posted on 24/12/09 at 03:22 PM |
|
|
It would appear my unit is missing a sub loom assembly.
Thanks for all your help.
Frank
|
|
|
bigpig
|
| posted on 24/12/09 at 06:15 PM |
|
|
On the acewells you get a plug between the sensor and the unit, but the extension loom is an optional accessory (as usual), I just chopped the sensor
end of the wire and spliced in an extra meter or so of wire.
|
|
|
