boggle
|
| posted on 28/12/09 at 01:24 PM |
|
|
luminition wiring
hi all
wiring is not my strong point and i have been given a dizzy that has been converted to use a luminition kit...
my problem is the plate inside where the points used to fit is fixed, so im assuming i dont need the vac advance as it is not fitted? also i have two
wires on the module a red and brown. im assuming they go to the coil? and the brown is of a heavier gauge....maybe to the posotive side of the
coil?
cheers
Boggle
just because you are a character, doesnt mean you have character....
for all your bespoke parts, ali welding, waterjet, laser, folding, turning, milling, composite work, spraying, anodising and cad drawing....
u2u me for details
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
|
|
twinturbo
|
| posted on 28/12/09 at 01:39 PM |
|
|
you should still have vac advance if it was originaly fitted, unless the ignition module has a vacum port ( lumenition does not )
mine had 3 wires
Lumenition will be able to tell you though.
TT
|
|
|
boggle
|
| posted on 28/12/09 at 11:04 PM |
|
|
thanks...had a look on there website and all my questions have been answeard...
just because you are a character, doesnt mean you have character....
for all your bespoke parts, ali welding, waterjet, laser, folding, turning, milling, composite work, spraying, anodising and cad drawing....
u2u me for details
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
