givemethebighammer
|
| posted on 24/4/04 at 02:11 PM |
|
|
Peugeot 106 stalks
anyone got a wiring diagram for the peugeot 106 indicator stalk and wiper stalk they could scan and email me ?
Found a set in the scrap yard and quite like the idea of using them
thanks
|
|
|
|
|
Northy
|
| posted on 24/4/04 at 03:21 PM |
|
|
What column are you fitting them to?
Graham
Website under construction. Help greatfully received as I don't really know what I'm doing! 
"If a man says something in the woods and there are no women there, is he still wrong?"
Built 2L 8 Valve Vx Powered Avon
|
|
|
Jon Ison
|
| posted on 24/4/04 at 08:25 PM |
|
|
I used nissan micra, dint take long with a battery n bulb to work out what was what.........
|
|
|
givemethebighammer
|
| posted on 25/4/04 at 12:51 AM |
|
|
Fitting them (well just the indicator one for now) to a sierra column, already sorted that bit out (bracket made from folded ali). Just the wiring to
do. I am making my own loom so just need to know what wires do what.
There are two connectors on the back of the indicator stalk
A white one with 5 wires coming out of it:
1. Thick white
2. Brown
3. Light Purple
4. Grey
5. Orange
and a larger black connector with 8 wires coming out of it:
1. Thick white (1)
2. Brown
3. Thin green
4. Thick blue
5. Light purple
6. Thick White (2)
7. Thick green
8. thin red
The stalk has the following controls:
1. Horn
2. Indicators
3. side lights
4. dip beam
5. Main beam
I have tried working it out using a multimeter but couldn't seem to get very far. I am almost certain the thick white wires are the earths but
from there ????
Someone must have a peugeot of some sort (assuming they use the same colour scheme on all their vehicles). Other wise I'll have to do a sneaky
down the local library (Halfords)
|
|
|
Guinness
|
| posted on 28/4/04 at 11:16 AM |
|
|
I have the Haynes Manual for the 106, i'm at work today, but i'll have a look through it tonight.
|
|
|
Avoneer
|
| posted on 28/4/04 at 04:44 PM |
|
|
Have a look here,
This fella has done it on his Tiger.
http://www.zetec-cat.co.uk/
(Click on the yellow one and follow the "modifications" link)
Pat...
[Edited on 28/4/04 by Avoneer]
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
givemethebighammer
|
| posted on 1/5/04 at 09:52 AM |
|
|
thanks the guy who had done it only details the wiring for the wiper stalk.
However I have obtained a Haynes manual from a guy at work - *&^%%^ those peugeot wiring diagrams only detail connector colours and pin numbers
NOT any wire colours. Almost worked it out but it has been a long process.
|
|
|
%20(WinCE).JPG)
