Mike McKinstry
|
 posted on 6/5/04 at 09:46 PM |
|
|
£25 pair plastic h/lights -have you got?
Hi,bought these from I think Premier last year at show.Black plastic shell with side light holder and h4 bulb-marked up.However I have just been to
MOT and apparantly beams are partly like a left hand drive beam with a small hi triangle being produced to the right of the beam.Suggestions to move
bulb holder etc but has anyone else come across this problem and how to fix????Was mot failure!!Mike. 
|
|
|
|
|
JoelP
|
| posted on 6/5/04 at 09:47 PM |
|
|
see bobs comments in his sva date thread, mk section. i think his black plastic ones failed the main test.
|
|
|
theconrodkid
|
| posted on 7/5/04 at 06:43 AM |
|
|
i got them,if you turn the reflecter/lense a few degrees either way the patern comes out right
who cares who wins
pass the pork pies
|
|
|
Peteff
|
| posted on 7/5/04 at 08:39 AM |
|
|
Me too.
Turned the glass about 10mm and they passed.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
britishtrident
|
| posted on 7/5/04 at 04:14 PM |
|
|
First check the bulb holders aren't universal LHD-RHD ones that are have a little plasic slide that allows the bulb to be roatated by 15
degrees in a clockwise direction when viewed from behind the reflector to give the correct beam pattern for the uk
|
|
|
