turbodisplay
|
| posted on 30/4/10 at 02:20 PM |
|
|
I can do CAN
Almost finished testing, but results so far are positive. My CAN to serial converter is finished, just requires a case to be machined up. It will be
able to be reflashed with a new program as required for different ECUs.
I have the CAN protocol for Emerald, if anyone has data on other ecus/ data formats I would be most grateful.
Thanks
Darren
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
|
|
kipper
|
| posted on 30/4/10 at 02:29 PM |
|
|
anything you can do
I wonder what Darren is on about.
Now, about my carbs and points.
Where did that go?
<<<<
|
|
|
Dusty
|
| posted on 30/4/10 at 04:19 PM |
|
|
Points. Pah. Fancy modern rubbish. I need to sort my magneto.
|
|
|
iank
|
| posted on 30/4/10 at 04:25 PM |
|
|
magneto, pah devils work. Now off to adjust the balls on my governor valve.
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
imp paul
|
| posted on 30/4/10 at 04:34 PM |
|
|
or its good to use a wibble switch most of the time
|
|
|
.JPG)
