big_l
|
| posted on 30/4/10 at 06:26 PM |
|
|
can you help with R1 wiring in a locost
hi guys my car is at a stage now where i cant do anything else untill its wired up ...
the only problem is im useless with electrics does anyone fancy lending a few hours to earn a few £££
the engine is an early R1 4XV carb lump
any help would be much appreciated i live near notts / newark
i have spoken to a few companies about doing it but dont want to have it gone again  lol
would much rather get my hands dirty !!!!
[Edited on 30/4/10 by big_l]
[Edited on 30/4/10 by big_l]
Check out my blog  mnrvortxhayabusa@blogspot.com
|
|
|
|
|
eznfrank
|
| posted on 30/4/10 at 06:46 PM |
|
|
You could send a message to Chris Mason on here. He's not a million miles away from you.
|
|
|
rgrs
|
| posted on 30/4/10 at 06:55 PM |
|
|
Where abouts in the uk are you ?
Doh ! read the full post, i'm too far away
They are not that hard to do, it's possible just to extend the r1 loom and interface to the ford switch gear.
Roger
[Edited on 30/4/10 by rgrs]
|
|
|
TimC
|
| posted on 30/4/10 at 06:57 PM |
|
|
Are you using the R1 Clocks? If you are not and want to splice into a standard kit-car loom then I can tell you what to do (once I've stared at
the diagram for a while!) If you want to use the clocks and relay box I'm less help.
|
|
|
big_l
|
| posted on 30/4/10 at 07:02 PM |
|
|
I have a digi dash for it and savage switches no stalks at all just switches
Eddie talked about using a seperate loom he can make me to do the lights it will be just engine side if things that will need doing .
I'm willing to pay if anyone fancies a few beers and some pizza lol
Check out my blog mnrvortxhayabusa@blogspot.com
|
|
|
fesycresy
|
| posted on 30/4/10 at 07:13 PM |
|
|
I'd get Mr Mason on the case.
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
|
TimC
|
| posted on 30/4/10 at 07:14 PM |
|
|
I'm up to my eyes at the moment, but can tell you / Ed what to do - you only need about 5-5 wires from the ECU!
|
|
|
StevieB
|
| posted on 30/4/10 at 07:23 PM |
|
|
Chris did my wiring for me - did a fine job of it (though the quality of the connectors wasn't what I was planning to use for the rest of the
car).
|
|
|
big_l
|
| posted on 30/4/10 at 07:37 PM |
|
|
Anyone got mr masons number?? My number is 07737814426 if you don't want to post it !! I'm gratefull of the help guys
Check out my blog mnrvortxhayabusa@blogspot.com
|
|
|
.jpg){kind=avatar}
