MakeEverything
|
| posted on 23/7/10 at 09:53 PM |
|
|
Megasquirt Question
Hi All,
Ive redrawn the megasquirt drawing to suit my installation and make things simpler to understand with the EDIS connection etc.
Can someone tell me about the connection of the injectors please? Injectors 1&2 connect to terminals 32 and 33, but is this a common signal to
both injectors, or separate signals from each? Same with injectors 3&4.
[Edited on 23-7-10 by MakeEverything]
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
|
|
flak monkey
|
| posted on 24/7/10 at 06:57 AM |
|
|
Injectors have bank 1 and bank 2. But there are 4 wires, bank one is a common connection as is bank 2, but they all come out on 4 pins of the
connector.
Bank 1 is normally connected to cyl 1 and 4, and bank 2 to 2 and 3. Though i doesnt matter if they are running batch fire/simultaneous.
Sera
http://www.motosera.com
|
|
|
MakeEverything
|
| posted on 24/7/10 at 07:08 AM |
|
|
OK, Thanks (again!). So the megasquirt connections share the load of two injectors over two terminals, but effectively short out?
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
Mal
|
| posted on 24/7/10 at 09:03 AM |
|
|
Look at the circuit diagrams on this website.
www.extraefi.co.uk
|
|
|
MakeEverything
|
| posted on 24/7/10 at 09:12 AM |
|
|
quote:
Originally posted by Mal
Look at the circuit diagrams on this website.
www.extraefi.co.uk
yes, i have. This is where my question comes from.
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
flak monkey
|
| posted on 24/7/10 at 11:51 AM |
|
|
Yes the 2 pins for bank 1 are connected together inside the ecu, as are the 2 pins for bank 2.
Sera
http://www.motosera.com
|
|
|
MakeEverything
|
| posted on 24/7/10 at 12:16 PM |
|
|
quote:
Originally posted by flak monkey
Yes the 2 pins for bank 1 are connected together inside the ecu, as are the 2 pins for bank 2.
Cool, Thanks David.
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
