austin man
|
| posted on 5/8/10 at 10:50 PM |
|
|
Megajolt
I am running megajolt on a Bike carbed Zetec Engine, do I need to connect the temp sensor to the Megajolt to achieve the best results ? ie differing
timming due to engine temp etc
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
|
|
r1_pete
|
| posted on 6/8/10 at 04:49 AM |
|
|
I never bothered on the last car I did, backtop on zrx750 carbs and megajolt, it ran fine, returned 38mpg, and performed extremely well, that was a
1.8 in an MGB.
I'm currently running the e type on 3 x 45 DCOEs, and megajolt, again with no temperature sensor, performance again is much improved over the
electronic distributor, but 14mpg at best is driving me down the efi route.
|
|
|
blakep82
|
| posted on 6/8/10 at 09:18 AM |
|
|
didn't know you could put a temp sensor to the megajolt? is that just on newer versions?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
r1_pete
|
| posted on 6/8/10 at 10:22 AM |
|
|
Yep, I built mine about 2 months ago, its about half the size of my previous mjlj box, so assume its the latest version.
|
|
|
blakep82
|
| posted on 6/8/10 at 11:04 AM |
|
|
i bought mine a few years ago, still not fitted  kinda wish i'd waited now...
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
.jpg)
