Barksavon
|
| posted on 2/12/10 at 06:09 PM |
|
|
Mega Jolt Software
Just collected my Megajolt ECU from Post Office, bought direct from Autosport Labs in America. There is no software Cd etc with it, should there be.
There is a cable to link to laptop so whilst i'm no expert, i'm assuming i need some software to be able to do the mapping etc....can
anyone help please
|
|
|
|
|
doddy
|
| posted on 2/12/10 at 06:13 PM |
|
|
lots on here
http://www.msefi.com/index.php
|
|
|
r1_pete
|
| posted on 2/12/10 at 06:20 PM |
|
|
All the software is downlodable from Autosport labs.com along with installation instructions etc...
If its prebuilt it should have the firmware installed, so all you need is the config deck.
[Edited on 2/12/10 by r1_pete]
|
|
|
whitestu
|
| posted on 2/12/10 at 09:25 PM |
|
|
You are likely to need a USB to serial converter to connect to the USB port on your laptop like this
Link.
Stu
|
|
|
paulf
|
| posted on 2/12/10 at 09:36 PM |
|
|
All the software is on the site to download , just be careful to get the latest version for the ECU that you are using as there are various versions
and release dates of the tuning software and firmware to support the older versions as well.
Paul
|
|
|
Barksavon
|
| posted on 3/12/10 at 07:13 PM |
|
|
ok chaps thanks for responses
|
|
|
.jpg)
