carlknight1982
|
| posted on 31/1/11 at 05:05 PM |
|
|
wiring security - IVA
Appologies is this is in the wrong section
Ive secured my wiring (all in ducting) down the trans tunnel with steel p clips but for the engine bay i want to use cable tie bases, am i right in
assuming this is ok so long as the base is screwed/riveted to the chassis?
I dont want to do it then fail the IVA on it
Logic will get you from a A to B
Imagination will take you everywhere.
|
|
|
|
|
tomgregory2000
|
| posted on 31/1/11 at 06:04 PM |
|
|
yep 
|
|
|
adithorp
|
| posted on 31/1/11 at 07:37 PM |
|
|
Yes, it'll pass (stuck on bases won't), but why drill extra holes in the chassis instead of just putting the tie around the tubes?
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
big-vee-twin
|
| posted on 31/1/11 at 07:47 PM |
|
|
used P clips throughout
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
carlknight1982
|
| posted on 31/1/11 at 07:52 PM |
|
|
I didnt think it would look real nice just tied to the chassis
and i didnt want to fork out for another 30 stainless p clips there working out dearer than the rest of the car!
Logic will get you from a A to B
Imagination will take you everywhere.
|
|
|
britishtrident
|
| posted on 31/1/11 at 09:01 PM |
|
|
Plastic P clips from B&Q
|
|
|
blakep82
|
| posted on 31/1/11 at 09:06 PM |
|
|
quote:
Originally posted by carlknight1982
I didnt think it would look real nice just tied to the chassis
and i didnt want to fork out for another 30 stainless p clips there working out dearer than the rest of the car!
yeah.... but you'll be using cable tie/tie wraps with the cable tie bases, so why not just cale tie round the chassis tubes?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
