tompat3463
|
 posted on 10/4/11 at 05:07 PM |
|
|
Which resistor for legal flash rate ??
Hi guys.
I fitted myself some little Arrow indicators to the front of my Indy..
However the flash rate is round double the legal rate..
There fitted with 23w bulbs
Just wondering which resistor I need and how the hell I go about fixing them ???
TIA Alan
|
|
|
|
|
Jon Ison
|
| posted on 10/4/11 at 05:17 PM |
|
|
Search ebay for a LED flasher unit, easier and better fix than a resistor
|
|
|
Jon Ison
|
| posted on 10/4/11 at 05:20 PM |
|
|
LED Flasher Unit 12v - up to 30w - 4 Pin | eBay UK
|
|
|
tompat3463
|
| posted on 10/4/11 at 05:23 PM |
|
|
ok thanks...
How do I go about fitting that then mate ???
|
|
|
Jon Ison
|
| posted on 10/4/11 at 05:25 PM |
|
|
Direct replacement of your current flasher unit, only down side if a bulb goes you wont know as it will always flash at the correct rate.
Is yours a 3 pin or 4 pin unit, I linked to a 4 pin.
|
|
|
tompat3463
|
| posted on 10/4/11 at 06:20 PM |
|
|
ah I seeee... ok will get that ordered..
Very helpfull... thanks Alot mate
|
|
|
brookie
|
| posted on 10/4/11 at 06:28 PM |
|
|
u prob need the 3 pin one m8 im going have to get myself one as well
[Edited on 10/4/11 by brookie]
|
|
|
PeterV
|
| posted on 11/4/11 at 10:46 PM |
|
|
6.8 ohm 25W mounted to the chassis for cooling works perfectly. Less than £1.50 each in most places.
|
|
|
