daniel mason
|
| posted on 24/4/11 at 05:48 PM |
|
|
savage hazard switch wiring
i have the savage hazard switch installed and thought i had it all working correctly but somehow i have made a mistake and am now struggling to find
it!
this is how i have wired it and i took it from the wscc post on their web
first set of contacts
1;feed to flasher relay
2;permanent live feed
3 ign live feed
second set of contacts
1;feed back from flasher relay
2; left and right indicators (with diodes to stop feedback)
3'not used
on my indicator stalk i have a feed in,a left and a right indicator.
the hazard switch works pefectly and flashes,and the tell tale lights on dash also flash togeter. but when hazards are turned off and i turn on
indicators the dash lights both stay on permanent and the flasher relay is not flashing! i have no indicators fitted as of yet as im wanting to do
all the dash wiring this week. so even if i put my left indicator on. the left and right dash lights are on permanent and no flash. i think the
problem is something to do with the indicator circuit.
[Edited on 24/4/11 by daniel mason]
|
|
|
|
|
Steve Hignett
|
| posted on 25/4/11 at 05:43 AM |
|
|
Have a look here Dan,
locostbuilders.co.uk/photos.php?action=gal&user=worX&folder=Wiring%20Diagrams
|
|
|
daniel mason
|
| posted on 25/4/11 at 08:32 AM |
|
|
thanks steve.still cant work out where ive gone wrong though. although i know its something to do with how ive wired the indicator side of the turn
signal circuit!
|
|
|
