sdh2903
|
| posted on 22/6/11 at 09:32 AM |
|
|
Couple of IVA lighting/telltale questions
Hi all
Couple of questions about lighting and telltales.
I have 3 savage switches, one each for side, dipped and mai beam, all the led switch lights are blue.
Q1. Savage side light symbol doesnt comply with recognised symbol in section 33 of the manual, so will it need labeling?
Q2. Side light and dipped beam switches are blue in colour when sw on, now my instruments light up when the side lights are on so that covers the
teltale requirement but the official tell tale colour should be green? as far as i can see the dipped beam dont require a telltale, but if there is
one fitted again it should be green?
I know the manual also states: "The tell tale must operate with the operation of the position lamp switch, it may be the illumination of the
instruments or a separate lamp of The tell tale must operate with the operation of the position lamp switch, it may be the illumination of the
instruments or a separate lamp of any colour (providing it is not likely to confuse the driver) clearly identified in either a pictogram (see section
33) or in a word format. clearly identified in either a pictogram (see section 33) or in a word format."
But could having three switches with the same colour be intepreted as confusing?
Q3. Do reflectors have to be mounted vertically a la fog/reverse?
Cheers
Steve
|
|
|
|
|
franky
|
| posted on 22/6/11 at 09:47 AM |
|
|
Everyone uses them and has no issues, I don't see why you should. Awesome dash by the way!
|
|
|
Macbeast
|
| posted on 22/6/11 at 09:51 AM |
|
|
AFIK only the fog light has to be mounted vertically.
These passed
[Edited on 22/6/11 by Macbeast]
I'm addicted to brake fluid, but I can stop anytime.
|
|
|
sdh2903
|
| posted on 22/6/11 at 09:58 AM |
|
|
quote:
Originally posted by franky
Everyone uses them and has no issues, I don't see why you should. Awesome dash by the way!
Cheers, I did think that but it just caught my eye when reading through the manual before fitting rest of lights.
I think your right about the fog but I will make the reverse light vertical just to match anyway.
|
|
|
Macbeast
|
| posted on 22/6/11 at 07:35 PM |
|
|
I had a query from Daniel Mason about the wedge I used to keep the fog light vertical.
If you look at the brake/indicator/tail light cluster you will see that it is mounted in a black plastic box. I had a spare one of these so I simply
cut the back box at about 25 deg to form a wedge. The fog light is fixed by long bolts that pass through the box and hold the whole thing to the rear
panel. This pic shows it better.
I'm addicted to brake fluid, but I can stop anytime.
|
|
|
