Michael
|
| posted on 23/1/12 at 09:54 PM |
|
|
Split convoluted sleeve
Where on the highstreet can you get split convoluted sleeving?
I only need a short lengh as have added a high level stop light and that is the last i need.
I can only find online sellers.
Thanks
|
|
|
|
|
PSpirine
|
| posted on 23/1/12 at 10:20 PM |
|
|
Halfords or other Car Audio place? Used in installs sometimes and is actually included in a lot of wiring kits..
|
|
|
Michael
|
| posted on 23/1/12 at 10:30 PM |
|
|
Have tried Halfords, but will look around some more
|
|
|
PSpirine
|
| posted on 23/1/12 at 10:31 PM |
|
|
Alternatively... how much are you after and what thickness? I'll check whether I've got any lying around
|
|
|
Michael
|
| posted on 23/1/12 at 10:33 PM |
|
|
6mm inside diameter and about half a meter in lengh.
The annoying bit is I have about 8" of the stuff but not enough for what I want.
Then I have quite a bit left of the other sizes that I have used.
[Edited on 23/1/12 by Michael]
|
|
|
craig1410
|
| posted on 23/1/12 at 10:41 PM |
|
|
If you're stuck, VWP will sell you a metre for 63p here:
http://www.vehicle-wiring-products.eu/VWP-onlinestore/sleeving/sleeving.php
Unfortunately postage is £3.95 an VAT an additional 0.92 so £5.50 in total...
I'll have a rummage in the garage tomorrow night unless someone else beats me to it. Like you though, I think I've only got the larger
stuff left over along with some spiral wrap.
Craig.
|
|
|
Michael
|
| posted on 23/1/12 at 10:43 PM |
|
|
Yes thanks Craig.
I have looked at VWP and Polevolt and have found the same prices.
The bay has cheapest at £2.39 for a meter so not realy worth the worry, but knowing its usualy 63p a meter then there is one hell of a mark up, but
that will include postage grrrrrrrr.
|
|
|
PSpirine
|
| posted on 23/1/12 at 10:44 PM |
|
|
Just had a rummage - sorry matey, can't find anything other than 5-6" off-cuts so must've used it all!
|
|
|
Michael
|
| posted on 23/1/12 at 10:46 PM |
|
|
No its ok, thanks for the look and unless you live in the garage, thanks for going out to look too.
|
|
|
omega 24 v6
|
| posted on 23/1/12 at 11:10 PM |
|
|
I have a bit I could post you.
If it looks wrong it probably is wrong.
|
|
|
designer
|
| posted on 23/1/12 at 11:12 PM |
|
|
Maplins? RS components?
|
|
|
Mr C
|
| posted on 23/1/12 at 11:23 PM |
|
|
I've a load, its not split, I cut it if required. I'm in Kent (Tonbridge way) if thats any good to you.
Girl walks into a bar and asks for a double entendre, so the barman gave her one
|
|
|
Michael
|
| posted on 24/1/12 at 09:48 PM |
|
|
quote:
Originally posted by omega 24 v6
I have a bit I could post you.
Thanks Omega, you have a u2u.
|
|
|
