t11
|
| posted on 4/4/12 at 06:21 AM |
|
|
temp sensor
Hi all,,,,,,,I need a water temp sensor that will work with my ms2 v3.....I got 1 from Dale @ bailey but droped something on it and broke the end off,
I think they are GM but don't know from what car, a part number would be great.....thanks Gordon
|
|
|
|
|
snapper
|
| posted on 4/4/12 at 06:29 AM |
|
|
I thought you could calibrate the megasquirt to the sender resistance?
What would be useful is to know the thread size required
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
matt_gsxr
|
| posted on 4/4/12 at 08:12 AM |
|
|
According to the megamanual
GM #12146312
(may have been replaced by #15326386)
Standard TX3
GP SORENSEN TSU81
AC DELCO 213-928
NIEHOFF DR134AK
WELLS SU109 MSD 2310 (includes connector)
http://www.megamanual.com/v22manual/mwire.htm
|
|
|
big-vee-twin
|
| posted on 4/4/12 at 09:06 AM |
|
|
You can use any, so long as the thread size fits the hole.
Then use tuner studio to reprogram the profile of the temperature to resistance.
You do this by measuring the resistance at three temperatures i.e. in the fridge 3 degrees, under your arm pit 34 degrees, and in steam 100 degrees
measure the resistance at these three points and then enter the temp and resistance into the software and burn to the MS2.
Alternatively you could buy a GM one from Phil at Extra EFI.
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
t11
|
| posted on 4/4/12 at 04:15 PM |
|
|
re temp sensor
Hi people...many thanks will get one tomorrow.........
|
|
|
AntonUK
|
| posted on 4/4/12 at 09:49 PM |
|
|
anyone know a decent supplier of the sensor & connector bundle
ExtraEFI site isnt Locost (total £40 for both sensors)
http://www.customcruisers.com do the bundle cheaper but want 8.50 post (£30 total)
Build Photos Here
|
|
|
