Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: help with wiring up oil light
doddy

posted on 10/8/12 at 02:30 PM Reply With Quote
help with wiring up oil light

hi i have a premier wiring loom fitted to my robin hood with zetec engine im trying to wire up the oil warning light at the dash end i have two wires black and brown and green both connected together for the light i think i have to add a earth and at the sender end i have a green and brown
with it all connected the light is on but will not go out it could be a dodgy oil switch can any one tell me what happens withthe switch does it earth when in use the not earth when oil presser come in any help would be great cheers ian





https://www.ebay.co.uk/str/4x4wheels

View User's Profile Visit User's Homepage View All Posts By User U2U Member
owelly

posted on 10/8/12 at 02:39 PM Reply With Quote
It's usual for the oil light sender to be earthed until it sees pressure, then it becomes open circuit. Can you temp fit a gauge to check you have pressure or use a bike/foot pump to apply pressure to the switch to see if it's working?





http://www.ppcmag.co.uk

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
big-vee-twin

posted on 10/8/12 at 03:05 PM Reply With Quote
Brown/Green should connect to the oil sender and the other end to the lamp. The other side of the lamp is black.

Without the engine running the lamp will be on and when the engine is running (if everything is ok) should go off.

The circuit earths through the sender.

So to check the wiring pull the wire off the sender and lamp should go out, touch it to earth it should come on, if that's ok you need to check the sender, it may be bust or could even have incorrect pressure rating i.e. its switching point is higher than the lowest oil pressure of your engine at tickover.





Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016

http://www.triangleltd.com

View User's Profile View All Posts By User U2U Member
britishtrident

posted on 10/8/12 at 04:36 PM Reply With Quote
A few oil pressure switches work the opposite way that is N.O ie pressure switches the connection. These were mainly fitted to cars with electric fuel pumps including many 1980s Rovers and Landrovers.





[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.