U2U | Member List | Search | Photo Archive | Chat | Links | Shop
Not logged in [Login - Register]
LocostBuilders » Forum » Electrics » Racetech Rev Counter Air Compressors at MachineMart.co.uk   go to bottom
Printable Version | Subscribe | Add to Favourites
 New Topic New Poll New Reply
Author: Subject: Racetech Rev Counter
cfc999
Contributor






Posts 441
Registered 9/7/11
Location Darwen Lancashire
Member Is Offline

Photo Archive Go!
Building: striker
posted on 12/1/14 at 08:04 PM Reply With Quote
Racetech Rev Counter

Trying to fit a old type 8k Racetech Rev counter to my xflow powered striker but not having much luck. Managed to get it wired up and gone through the initial set up procedure were you set the number of cylinders by holding down a button on the end of a wire that runs from the back of the gauge (it also has a toggle switch that resets the max revs used). When I start the engine the rev counter needle moves but it does not match the number of revs. When then engine is ticking over the needle is pointing at 4k so not sure where I've gone wrong. Tried going through the set up procedure a number of times with the same result. Anyone got any idea's.
Cheers
Chris
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


 LocostBuilders » Forum » Electrics » Racetech Rev Counter go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.