macspeedy
|
| posted on 7/11/04 at 03:27 PM |
|
|
fuel sender hole
wanting to know what size people have drilled the hole in there tanks for the fuel sender not wanting to take mine apart again, its for a friend.
Thanks
|
|
|
|
|
JohnN
|
| posted on 7/11/04 at 04:31 PM |
|
|
Surely depends upon the type of sender..........
My telemetrix sender stated 43-44mm dia., though I ended up wiggling it in through a slightly smaller hole, with no danger of anything shorting out.
|
|
|
rusty nuts
|
| posted on 7/11/04 at 07:58 PM |
|
|
Try using the sender unit gasket as a template, worked O.K for mine, hope this helps. Rusty
|
|
|
mangogrooveworkshop
|
| posted on 10/11/04 at 11:54 AM |
|
|
Fuel Level Gauge (Arm type sender)
Fuel sender (Arm type sender)
Fuel Level Gauge (Dip type sender)
Fuel sender (Dip type sender) from
Whats the differance ?
Cheapest one for R1 gauge/light
[Edited on 10-11-04 by mangogrooveworkshop]
|
|
|
macspeedy
|
| posted on 10/11/04 at 12:53 PM |
|
|
this is what you are looking for it is the arm type sender
http://www.rjays.com/Gauges/autometer_images/3262_large.jpg
|
|
|
.jpg)
